Angelo Po 0N1CP1GH Manual De Uso página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Important
Make a daily check that the safety devices
are properly installed and in good working
order.
Important
At the end of each cooking cycle, after empty-
ing the tank, be sure to turn off the pilot light
by placing the burner control knob to "0" .
Caution - Warning
The floor, near the appliance, could be slip-
pery.
Important
The necessary connections (water, electricity
and gas) must be set up exclusively by suit-
ably specialised staff , in accordance with local
requirements.
Important
Before fi lling the tank, make sure the drain le-
ver is on "CLOSED" .
Important
Drain the well completely after use.
Caution - Warning
Never use the appliance with no water in the
well, as this may damage its structure.
Important
Before carrying out any servicing proce-
dure, activate all the safety devices pro-
vided and decide whether staff at work and
those in the vicinity should be informed.
Important
Before starting any cleaning operation, al-
ways turn off the gas supply tap, cut off the
electricity supply using the master switch and
allow the appliance to cool.
Caution - Warning
When using detergents, rubber gloves, pro-
tective mask and safety goggles must be worn
in accordance with the relevant safety regula-
tions.
Caution - Warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
Caution - Warning
Before doing any work, cut off the mains elec-
tricity supply.
Important
Before it is put into service, the system must
be tested to check the operating conditions
of every single component and identify any
malfunctions. In this stage, it is important to
check that all health and safety requirements
have been complied with in full.
Important
Before making any type of adjustment, acti-
vate all the safety devices provided and de-
cide whether staff at work and those in the vi-
cinity should be informed.
Important
Before carrying out any replacement proce-
dure, activate all the safety devices provided
and decide whether staff at work and those in
the vicinity should be informed.
Caution - Warning
Do not obstruct the fl ue to avoid the tempera-
ture of the combustion components and prod-
ucts from increasing excessively over the ad-
missible limits.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

0t1cp1gh1n1cp2gh1t1cp2gh

Tabla de contenido