Tabla de contenido
Publicidad
GPS 40A
Plasma cutting
Suitable for welding with an increased
electric risk.
10A/84V
Single-phase alternating current with
40A
rated frequency of 50-60 Hz
370V
96V
Direct Current
30A
370V
Fan
Class H
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Artikelnummer: 20063
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Baujahr: 2017
Maintenance
Class H
Seriennummer:
Artikelnummer: 20063
Baujahr: 2017
Unplug the machine before any work on it.
Seriennummer:
Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
WARNING In order to ensure the safety of the device,
only genuine spare parts from the manufacturer or
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
spare parts that have been approved by the manufac-
turer should be used.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
Caution! If the power cord of the appliance gets
damaged, it must be replaced by the manufacturer
or its customer service or a similarly qualified person
to avoid danger.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at
www.guede.com.
Guarantee
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
GPS 40A
GPS 40A
Single Phase Output
Static Frequency Converter
Rectifier
10A/84V
40A/26V
10A/84V
40A/26V
40A
370V
40A
GPS 40A
370V
96V
40A/26V
96V
30A
30A
25.8A
20A
Class H
Class H
90.3V
88V
Artikelnummer: 20063
10A/84V
40A/26V
Artikelnummer: 20063
Baujahr: 2017
Baujahr: 2017
Seriennummer:
15A
Seriennummer:
40A
25.8A
20A
96V
90.3V
88V
30A
15A
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
25.8A
20A
25.8A
20A
Let us refer to the fact we do not assume any respon-
90.3V
88V
sibility – according to standards in force – for damage
90.3V
88V
eventually caused by our appliances in the below-
15A
mentioned cases:
15A
Important information for the customer
Please be sure to know that returning the product
in or after the warranty period must be made in the
original packaging.
Service
Do you have any technical questions? Do you have a
complaint? Do you require spare parts or an opera-
ting manual? You can get quick and unbureaucratic
assistance in the Service section on the homepage
of our service partner Güde GmbH & Co. KG (www.
guede.com). Please help us to help you. In order to be
able to identify your device in the case of a complaint,
our service partner will require its serial number,
article number, and year of manufacture. All this
information can be found on the nameplate.
Tel.:
Fax:
E-Mail:
Failure removal
Failures
Electric arc
turned off
Welder suddenly
stops working
after longer
operation
+49 (0) 79 04 / 700-360
+49 (0) 79 04 / 700-51999
support@ts.guede.com
Causes
Removal
Poor contact
Tighten the
between earth
pliers and check
pliers and the
them
respective part
Remove paint
and rust
Short circuit
Clean or replace
between current
the current and
nozzle and gas
gas nozzle
supply pipe
Current nozzle
without dirt,
paint and rust
remains
Too loose cur-
Tighten the
rent nozzle
current nozzle
firmly
Welder has
Let the welder
overheated due
cool down
to too long use
and the thermal
protection has
activated
ENGLISH
17
Publicidad
Tabla de contenido
