English; Description; Maintenance And Cleaning; Safety Instructions - Auxilab Nahita blue Manual De Instrucciones

1. DESCRIPTION

On/Off
Power button
Time adjustment
Speed adjustment

2. SAFETY INSTRUCTIONS

Read the user's manual before operating with the equipment. This equipment must be
used only by qualified staff.
This manual should be available for all users of this equipment.
Follow the safety instructions, guidelines, occupational health and safety and accident
prevention regulations indicated in this manual.
The voltage stated on the label must correspond to the main power supply.
The device must only be operated with the original plug-in power supply unit.
The instrument can only be disconnected from the main power supply by pulling out
the connector plug, not the cable.
During operation wear the necessary personal protections according to the hazard cate-
gory of the medium to be processed; otherwise there can be risk of:
• Splashing liquids
• Projected particles
• Body parts, hairs, clothing or jewels to get caught.
Make sure the equipment is placed and installed in a spacious area on an even, stable,
clean, non-slip, dry and fire-proof surface.
Respect the minimum safety distances between devices, between the device and the
wall and above the assembly (min.100 mm).
Instruction manual 50681022
Attachment
LCD display
Start/Stop button
Pag. 10 Version 1 April-2015

ENGLISH

7. MAINTENANCE AND CLEANING

The equipment is maintenance-free.
Do not allow moisture to get into the equipment when cleaning.
Unplug the power line when cleaning.
Use only the following products:
• For dyes: Isopropyl alcohol
• For construction materials: Water containing tenside / Isopropyl alcohol
• For cosmetics: Water containing tenside / Isopropyl alcohol
• For food: Water containing tenside
• For fuels: Water containing tenside
Wear the proper protective gloves during cleaning of the instrument.
Antes de utilizar algún otro método de limpieza o descontaminación, contacte con su
distribuidor para evitar dañar el equipo.
The instrument must be cleaned and put it into the initial packaging carton before sen-
ding to service for repair, avoiding the contamination of hazardous.
Use the instrument in a dry clean room and stable temperature environment.
or by other forms of re-utilization of old appliances, you are making an important contribution to
protect our environment.
Please inquire at the community administration for the authorized disposal location.
Instruction manual 50681022
I
NSTRUCTIONS ON ENVIRONMENT PROTECTION
At the end of its life cycle, please, do not dispose of this equipment by throwing
it in the usual garbage; hand it over a collection point for the recycling of electri-
cal and electronic appliances. It does not contain dangerous or toxic products for
humans but a non adequate disposal would damage the environment.
The materials are recyclable as mentioned in its marking. By recycling material
Pag. 15
ENGLISH
Version 1 April-2015