Dust Suction - IPC Soteco ALFA 650 Manual De Uso Y Mantenimiento

GB
(EXTERNAL TANK)
A - Engine block
B - Cloth fi lter
C - Container
D - External tank
E - Market trolley
F - Aspiration inlet
G - Flexhose
L - Hydrolytic hose
J - Aspiration hose
Y - Floater
(INTERNAL TANK)
A - Engine block
B - Cloth fi lter
C - Container
F - Aspiration inlet
G - Flexhose
H - Detergent's bucket
I - Balancing trolley
L - Hydrolytic hose
Y - Floater

DUST SUCTION

- Insert cloth fi lter B in container C (pic.1) removing
bucket H if necessary
- Assemble aspiration head A in the container C and
clasp both hooks (pic.3)
- Insert hose G in the aspiration inlet F (pic.4)
- Insert at the hose end G handle M1 and extensions
M (pic.5)
- Connect the most suitable accessory
- Start aspiration by pushing the red push button, after
correctly plugging in the device (pic.6)
- Example of use with PVC brush P (pic.7)
- Example of use with fl at lance Q (pic.8)
- Example of use with round brush O (pic.9)
- Example of use with dust brush S (pic.10)
- Example of use with brush for fitted carpets T
(pic.11)
- If a paper fi lter is available, insert it in the container
adjusting it on the defl ector (pic. 12).
LIQUID SUCTION
- Remove cloth fi lter B from container C (pic.2)
- Insert bucket H in the container (pic. 13) – except for
models with external tank
- Assemble aspiration head A on the container C and
clasp both hooks (pic.3)
- Insert hose G in the aspiration inlet F (pic.4)
- Insert at the hose end extensions M or N (pic.5)
- Connect suction cap brush U
10
ACCESSORIES FOR ASPIRATION
STANDARD/OPTIONAL
M - Aluminium/plastic hose (2 pcs)
M1- Handle
N - Double bend Issa (OPTIONAL)
O - Round brush
P - PVC Brush (OPTIONAL)
Q - Flat lance
R - PVC Reduction
S - Issa dust brush
T - Issa brush for fi tted carpets (OPTIONAL)
U - Issa suction cap brush
EXTRACTION ACCESSORIES
STANDARD/OPTIONAL
V - Inlet for washing armchairs
W - Carpet tool 2 nozzles (OPTIONAL)
Z - Brush for washing fl oors 4 nozzles (OPTIONAL)
- Start aspiration by pushing the red push button, after
correctly plugging in the device (pic.6)
- Example of use with suction cap brush U (pic. 14)
WASHING WITH INJECTION-EXTRACTION SYSTEM
- Remove cloth fi lter B from container C (pic.2)
- Insert bucket H in the container (pic. 13) – except for
models with external tank
- Pour the detergent in the external tank D or in bucket
H (pic. 15)
- Assemble aspiration head A on the container C and
clasp both hooks (pic.3)
- Insert hose G in the aspiration inlet F (pic.4)
- Connect to the hose end the accessory chosen (V, W, Z)
- Connect the hydrolytic hose's end L with the clutch
located on the head (marked with "USCITA-EXIT" in
models with external tank) and the other end with the
clutch located on the accessory's tap (pics. 16-17)
- Start engine by pushing the red switch and the pump
by pushing the green switch after correctly plugging
in the device
- Push the tap's lever and let the accessory on the
surface to be cleaned glide towards you (pic.18)
- After the running, release the tap's lever and repeat
the operation after lifting and removing the accessory
(pic.19)
- Proceed in the same way with the inlet for washing
armchairs V (pic. 20)