PLANET
9 - SPECIFIC USES
In this section we will describe the operation
that allows the collection (sacking) and the
removal of sucked materials.
9.1 Dust sacking
Perform the following operations:
- Remove the main tank
- Put the polyethylene bag) into the main
tank
- Follow the operations described in § 8.2
- Suck the dust
- Remove the main tank and the sack.
ATTENTION:
To keep polyethylene bag correctly opened make
a 1 cm (0.40 in) diameter hole (with finger) in
the polyethylene bag at 2-4 cm (0.79-1.6 in)
to tank border.
9.2 Small scrap sacking
Through this operations it is possible to sack
big and very light scrap (paper, textile, fi bre
glass)
Perform the following operations:
- Remove the main tank
- Use the scrap suction ring, the tank for
scrap suction and the fi ltering bag for light
scrap suction (Ref.20816-Optional)
37