Peg-Perego Isofix base 0+1 Instrucciones De Uso página 9

that luggage or other objects do not injure the
child in the safety seat in the case of accidents.
• Do not use installation methods different from
those indicated. This would result in the risk of
detachment from the seat.
• Child car seat base, group 0+, "Semi-Universal"
category, class E for use with the various
versions of the Primo Viaggio Tri-Fix. Approved
under European standard ECE R44/04 for
children weighing from 0 to 13 kg (0 to 12/14
months). Only for use in vehicles fitted with
Isofix approved points (for details see the list
of car models fitted with Isofix attachment
systems).
• Child car seat base, group 1, "Semi-Universal"
category, class A for use with Viaggio1 Duo-
Fix. Approved under European standard ECE
R44/04 for children weighing from 9 to 18
kg (from 9 months to 4 years approx). It can
only be used in vehicles with approved Isofix
points.
• Check the vehicle's use and maintenance
manual to see whether it is compatible with
Isofix child restraint systems.
• If you are unsure of anything, contact the
manufacturer or the retailer of this child car
seat.
• Do not remove the stickers; this could mean
that the product no longer conforms with
standards.
• Do not use this base if it is broken or has
missing parts, if it is second-hand or of
uncertain origin, or if it has undergone violent
strain in an accident, as it may have suffered
extremely dangerous structural damage.
• Do not modify the product.
• For any repairs, replacement parts or
information on the product, contact the
post-sales assistance service. The relevant
information is provided on the last page of this
manual.
• Do not use this base after a period of five
years has passed from the date of production
indicated on the bottom. The natural ageing
of the materials may mean that it is no longer
compliant with standards.
Instructions for use in car
1• Find the Isofix attachment points on the car
BaseIsofix_0+1_EU_FI000903I86_CS9 9
seats.
2• Lengthen the Isofix attachments on the
base by pressing the lever as shown in the
figure. As well as being extendible, the Isofix
attachments can also be adjusted for flexion
for easy engagement.
3• Extract the support leg from under the base
and fold it outwards until it clicks into position.
Position the base on the car seat as shown in
the figure, aligned with the Isofix attachments.
4• Engage the attachments on the base to the
seat buckles (check that there is nothing
interfering with the seat buckles that could
stop them from functioning properly).
• IMPORTANT: The two signals on the sides
of the handle go from red to green to indicate
that it is properly attached.
• IMPORTANT: Once the procedure is
complete, move the base to check that both
Isofix points are actually attached.
5• Adjust the height of the support leg by
pressing down the inner catch until it touches
the car floor (it is important for the leg to be
well supported on the car floor even if this
causes the base to be slightly raised from the
vehicle seat).
• Once the above steps are complete, "Isofix
Base 0+1" can remain in the car ready for use.
• If your car has storage compartments on the
floor of the vehicle, in the area where the support
leg is to rest, you should open the compartment
and rest the leg on the bottom of it.
Connecting the various versions
of the Primo Viaggio Tri-Fix
• Place the child in the "Primo Viaggio Tri-Fix"
car seat safety seat, remembering to secure
him/her with the harness. Lift the chair with
the handle (facing the opposite direction to
normal vehicle movement) and engage to the
base by pressing down with both hands on
the chair until it clicks into place.
• IMPORTANT: The two signals behind the
base go from red to green to indicate that the
child car seat is properly attached.
• IMPORTANT: Once the procedure is
complete, move the child car seat to check
that it is actually attached.
• Inside the car, the handle must be fully
9
24-07-2009 11:07:14