Gas Supply; Electrical Connections; Surface Burners - GE PGS930FEL1DS Instrucciones De Instalación

1

GAS SUPPLY

WARNING
Fire Hazard: Do not use
a flame to check for gas leaks.
WARNING
Explosion Hazard: Do
not exceed 25 ft-lbs of torque when making
gas line connections. Overtightening may
crack the pressure regulator resulting in fire
or explosion hazard.
Gas Pressure Regulator
Natural Gas:
Propane Gas:
Shut off the main gas supply valve before
disconnecting the old range and leave it off
until the new hook-up has been completed.
Don't forget to relight the pilot on other gas
appliances when you turn the gas back on.
CONNECTOR HOOKUP
Flexible
Option
Installer: Inform the consumer of the location of the gas shut-off valve.
Rigid Pipe
Option
2
ELECTRICAL
CONNECTIONS
WARNING
Shock Hazard: This
appliance must be properly grounded.
Failure to do so can result in electric shock.
Electrical Requirements -
Note:
Grounding
3

SURFACE BURNERS

WARNING
Fire or Explosion Hazard:
Do not operate the burner without all burner
parts in place.
Burners -
Caps -
Grates -
DO NOT, UNDER ANY CIRCUMSTANCES,
CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER CORD. DO
NOT USE AN ADAPTER. DO NOT USE AN
EXTENSION CORD.