GE JX7230DLWW Instrucciones De Instalación página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1 LOCATE AND INSTALL
BASE PAN
Set Base Pan into the front cabinet microwave oven
cutout and center it right and left. Push back until the
front flange is against the cabinet front wall. Mount
the Base Pan using 3 short screws.
Short
Screws
Base Pan
Mounting Holes
2 INSTALL BOTTOM BRACKETS
Set the two bottom brackets onto the Base Pan
making sure the front flanges are against the cabinet
front wall and the edge of the Base Pan. Align the
brackets with the corresponding holes and mount both
brackets using 4 short screws, two screws for each
bracket.
Flanges flush with
cabinet front wall
Bottom
and edge of Base
Brackets
Pan
Installation Instructions
3 INSTALL UPPER BRACKET
Install the Upper Bracket on the top of the cabinet.
Center the Upper Bracket in the top of the cabinet
cutout making sure the front flanges are against the
cabinet front wall. Once centered, secure the Upper
Bracket using 4 short screws.
Front Flanges against
cabinet front
Short Screws
4 INSTALL THE RAILS
Remove everything out of the microwave oven,
including packing, Owner's Manuals, turntable and
turntable support. A protective film has been applied
to some microwave oven and trim kits. If applied,
remove the film. Turn over the microwave oven and
secure the rails to the base of the oven by inserting 4
short screws in locating hole number 33. Be careful
not to scratch the microwave oven.
Short
Screw
Rail
Flanges
3
Upper Bracket
Microwave
Oven Bottom
Door

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Jx7230dlbbJx7230elesJx7230slssJx7230bltsJx7227dlwwJx7227dlbb ... Mostrar todo

Tabla de contenido