Specified Use; Safety Precautions - BAT BT-166 Instrucciones De Uso

Battery Powered Photoelectric Smoke Alarm
3

Specified use

The photoelectric smoke alarm is intended to be used as an
independent unit and must not be combined with other smoke
alarms. It is designed to detect not only smouldering fires but
also open fires with a build-up of smoke in interior rooms. If a
certain volume of smouldering heat or smoke forms, the smoke
alarm will set off an acoustic and visual signal. It may only be
mounted and operated in dry rooms. Use elsewhere than as
specified in this handbook is not permitted and will lead to the
product becoming damaged.
4

Safety precautions

IMPORTANT:
To prevent injury or material damage, observe the following
instructions without fail.
Place of use: The smoke alarm is not protected against
moisture or water. It must not, therefore, be used out of doors or
in damp rooms.
DANGER:
Failure to observe these instructions may cause the smoke
alarm to malfunction or to fail completely.
The guarantee will not apply in the event of material damage or
physical injury arising through a failure to observe the
instructions laid down in this handbook, particularly those
relating to safety and use.
Similarly, no liability will be accepted for consequential damage.
The handbook should be kept for future reference and, if
applicable, be handed on to the next occupant of the property.
User's Handbook 30
BAT
Status: 07-2008