Function Check/Test - BAT BT-166 Instrucciones De Uso

Battery Powered Photoelectric Smoke Alarm
7.4.

Function check/test

Step Action
1 Carry out
function test
User's Handbook
Description
IMPORTANT: A function test must
be carried out weekly. Press and hold
the function test button for 3 seconds.
This is followed by a loud intermittent
acoustic alarm which will stop when the
button is released. During the function
test, the LED flashes rapidly.
Pos Description Function
2 Function
button
3 LED
45
BAT
2
3
Carries out function
test when pressed
Indicates that the
alarm is in
operational
condition
Status: 07-2008