Replacing/Installing The Battery - BAT BT-166 Instrucciones De Uso

Battery Powered Photoelectric Smoke Alarm
Step Action
3 Secure the
housing to
mounting
plate.
4 Carry out
test
7.3.

Replacing/installing the battery

Step Action
1 Remove
housing
2 Remove old
battery
User's Handbook
Description
Position the mounting slot in the housing
on the lug of the mounting.
When in place, turn the mounting housing
clockwise until the slot plate is fully
engaged.
CAUTION: The housing cannot be
attached to the mounting plate without a
battery. This is barred for reasons of
safety.
Carry out a function test (see section 7.4).
Description
To remove the battery, turn the housing
anticlockwise. It can then be removed
and access obtained to the battery.
Remove the battery from the battery
compartment by releasing the clip from
the battery terminals.
NOTE: Follow the instructions
under Disposal (section 11).
42
BAT
Status: 07-2008