Uebler F32-XL Manual De Uso página 12

Electricity supply
Uebler F32-XL, for max. 3 bicycles
Uebler F42, for max. 4 bicycles
Maximum tube diameter of bicycle frames
Round tube
Oval tube
Folding out / collapsing the bicycle rack
Folding out the bicycle rack
7
7
1. Open the quick release clamp (7).
2. Fold up the rack frame (8) and close the quick release
clamp (7). If necessary, turn the quick release clamp (7)
clockwise if the rack frame (8) is too loose.
Note
If the quick release clamps (7) cannot be closed, turn
anticlockwise.
9
3. Fold out the wheel rails (9) and engage.
13-pole, 12 V
13-pole, 12 V
3 inch (80 mm)
3 x 1.7 inch
80 x 45 mm
4. Fold out the tail lamps (10) and engage.
5. Unlock the brackets (11 and 12) with the key (4).
6. Swing the brackets (11 and 12) forward and slide along the
8
7
M+P-25A-0167
7. Press the bracket (17) down. Insert the number plate in the
9
M+P-25A-0076
- 10 -
10
track frame (8) into the required position.
Note
The registration number on the bicycle rack must match the
registration number of the vehicle and be clearly legible.
13
19
number plate holder (13), press up against the stoppers (18)
and insert fully. Release the bracket (17) and check that it is
positioned securely.
Note
To insert higher number plates, press the stoppers (18) back
and slide the plate fully into the number plate holder (13).
For narrow number plates, use the drilling points (19) for
attaching the plate.
12
4
11
M+P-25A-0077
18
17
M+P-25A-0078
8