Clatronic SLS 693 Instrucciones De Servicio página 26

Connecting the Receiver
• Connect the surround or front loudspeakers to the R
OUT / L OUT (right/left) of the receiver.
• Insert the mains lead into a nearby socket and switch
the receiver on.
Note: With the VOLUME control (11) you can individually
adjust the volume of the loudspeakers connected to the
receiver.
Channel Adjustment
• Press the FREQUENCY SELECT button on the bot-
tom of the transmitter. Then please press the SCAN
button on the receiver.
• When the SCAN button is pressed again the next
channel is selected.
• Changing the channel setting may also be necessary
in cases where reception is not perfect.
Rectifying Faults
No Audio Transmission
• Has the mains adapter/mains lead being inserted?
Check the connection on both the transmitter and the
receiver.
• Is the receiver switched on? Turn the receiver on with
the mains switch located on the rear of the device.
• Is the transmission source switched on?
• Walls and ceilings reduce the range.
• Check the connections on the connected devices.
• Check whether the signal source (e.g. DVD player) is
set to surround playback.
Poor Reception Quality
• Turn the transmitter and receiver again so that they
face one another.
• Change the position of the transmitter and receiver a
little.
• Poor reception may result from interference from
other radio-transmitting devices such as cordless or
mobile telephones or CB radio.
Remote Control
Inserting the Batteries
(not supplied)
• Open the lid of the battery compartment on the back
of the remote control.
• Insert 2 batteries of type LR3 „AAA" 1.5V. Please
ensure that the polarity is correct (see the fl oor of
the battery compartment or the inscription on the
outside)!
26
05-SLS 693 Neu 26
Receiver
• If the remote control is not used for a prolonged pe-
riod, remove the batteries in order to prevent battery
acid leaking.
• Different battery types or new and used batteries
must not be used together.
Warning: batteries are not to be disposed of together
with domestic wastes. Dispose of the used batteries at
the relevant collection bin or at your dealer's.
Never throw batteries into the fi re.
When the remote control is used, care should be taken
that there are no objects between the remote control and
the central loudspeaker. (e.g. table, chair, etc.). These
objects prevent the infrared beam of the remote control
from reaching the receiver of the central loudspeaker. It is
then not possible to control the television with the remote
control.
1 MUTE
With this button you can switch off the loudspeakers
without changing the volume (the operating status
LED of the subwoofer fl ashes).
Note: When switching off this function ensure that the
overall volume is not set to maximum!
2 SUBWOOFER +
With this button you can increase the volume of the
subwoofer.
3 SUBWOOFER -
With this button you can decrease the volume of the
subwoofer.
4 CENTER +
With this button you can increase the volume of the
center.
5 CENTER -
With this button you can decrease the volume of the
center.
6 SR +
With this button you can increase the volume of the
surround loudspeaker.
7 SR -
With this button you can decrease the volume of the
surround loudspeaker.
8 MASTER +/-
Toetsen voor de volumeregeling.
09.02.2006, 10:34:32 Uhr