Horotec MSA19.106 Manual De Instrucciones página 6

EN
DESCRIPTION
HOROTEC Turbo is an electronic device for testing the mechanical parts (wheel train) of
®
analogic quartz watch movements. Please do not use it for testing mechanical watches.
OPERATING
The device gives powered magnetic impulsion for turning the wheel train and watch hands
of the most analogical quartz electronic watches.
The device can be used :
- for unlock the wheel train : locking caused by dust, dry oils or hands touching themselves,
the dial or the indexes.
- for testing the functioning of the wheel train : after testing the electronic parts with the
HOROTEC Pulse (MSA19.106).
®
INSTRUCTIONS FOR USE
1) Place the watch or the watch movement to check on the central area of the device.
2) Switch on the device by pressing the yellow button and keep it pressed as long as
desired. If the wheel train and the hands do not turn, move the watch as far as the hands
are turning regularly. When turning the wheel train and the hands, we can control visually
the functioning. Clean if necessary the wheel train, or adjust position of the hands, for a
good and smoothly functioning.
6
HOROTEC Turbo / MSA19.107
®