VBM SUPER 2B Manual De Instrucciones página 60

C
4
1
2
18
USING THE MACHINE CONNECTED TO THE WATER
SUPPLY
To use the machine connected to the water supply, you
must do the following:
• Remove the tray (1), unscrew the cap (2) and attach the
fitting (3) provided.
B
• Replace the tray (1) in the machine.
• Remove the water tank (B).
• Replace the tank in the machine (D).
• Place the machine on its side.
D
• Turn the valve (5) from " A" to "R".
3
IMPORTANT: Tighten the screw supplied (4),
to switch on the tank support (C).
A
5
R