Product Introduction; Operating Principle; Technical Parameters - Zodiac ZS-05C Manual De Usuario

PRODUCT INTRODUCTION

This product is a wireless photoelectronic smoke detector, hereinafter called detector. With a unique
structure design and an intelligent MCU to process photoelectronic signals, it is provided wi th dus t -proof,
mothproof and ant i - l ight interference etc. functions, ensuring the detector stability from design basis.
Meanwhile, the detector could be programmed to an alarm system via wireless networking , suitable for all
kinds of installation environments and enhancing users' perception of alarm signal. It reacts very quick to
visible smoke released by smoldering fire and flaming fire, and suitable for fire alarm in houses, factories,
shopping malls, hotels, restaurants, office buildings, teaching buildings, banks, libraries, warehouses, etc.

OPERATING PRINCIPLE

This detector adopts the principle of smoke particles reflecting infrared lights. The main circuit includes a
MCU processing part, an infrared emission part and an infrared reception part. The emission and reception
diodes are placed in the optical maze chamber which can shield the interference of outside stray lights, but
will not influence smoke entering into the detector. On smokeless conditions, the received infrared lights
are very weak. When smoke entering, due to scattering effects, the received light signals increase. When
smoke density accumulates up and reach the alarm threshold of the MCU, the detector will blink its alarm
indicator, give out strident alarm sound and send out alarm signal to the networking alarm system.
FEATURES
● Adopts MCU Auto-Processing Technology
● Wireless Networking to Alarm System
● Hush Button
● Malfunction Auto-Check
● Auto-Reset After Trigger
● Infrared Photoelectronic Sensor
● Sound & Flash Alarm / LED Indicating Alarm
● SMT Manufacture Technology, Reliable Stability
● Dust-proof, Moth-proof, Anti White Light Interference
● Anti-RF Interference (20V/m-1GHz)

TECHNICAL PARAMETERS

Operating voltage:
① 9V battery
(6F22 carbon battery, DC type)
② AC220V /110V with 9V backup battery
Static current: ≤ 20uA
Alarm current: ≤40mA
Battery life: carbon battery for about 1year
Alarm indication: LED flashes in Red
Alarm sound: ≥ 85dB/3m
Radio frequency: 315MHz/433MHz
INSTALLATION
1. Avoid installations in places with stagnating smoke, heavy dust, heavy water mist, heavy oil mist, great
humidity ( >95%) and high wind speed ( >5m/s).
2. Insert the ready battery into the battery cabinet. Choose a proper position. Normally, the center of the
detection area ceiling is recommended. Fix the detector base into the chosen position and connect the
wires if the detector is a AC TYPE.
Then put the detector into the base and twist to fasten it. Be sure it is fastened tightly.
OPERATING INSTRUCTION
Function Setup
Jumper Setting: use jumpers to set address code and defense zone code between the detector and the networking
EN
Code form: 2262 code
Radio transmitting distance: 200m
Operating temperature: -10 ℃ ~ +50 ℃
(AC type)
Humidity: ≤ 95 ％ RH
Dimension: Φ 128*38mm
Execution standard: GB4715-2005, EN14604, UL217
Detecting area:
2
80m at 6-12m installation height
2
60m at installation height <6m
(open area)