Velleman CAMCOLD4 Manual Del Usuario página 7

b. Controlling the P/T and the Lens
• Select a camera (see "Selecting a Camera").
• Press I-, I+, Z-, Z+, F- or F+ to control the P/T or tilt the joystick to control the lens.
Example: Controlling the P/T of camera n° 2.
o Press 2 and the CAM key to select camera n° 2.
o Tilt the joystick to control the camera P/T or use the I-, I+, Z-, Z+, F- or F+ key to control the lens.
c. Setting Up the Preset
• Select a camera and set the P/T and the lens to the desired position.
• Press the F1 key and press 8.
• Define the preset number (1 – 32).
• Press PRE to confirm.
Example: Setting preset 15 to camera n° 5.
o Press 5 and then press the CAM key to select the camera.
o Move the P/T and the lens to the desired position.
o Press the F1 key.
o Press 8.
o Press 15.
o Press PRE to confirm your selection.
d. Running the Preset
• Select the desired camera number.
• Define the preset (1 - 128). The default preset is 1.
• Press the CALL key. The corresponding preset will be displayed on the screen.
Example: Setting camera n° 3 to preset 6.
o Press 3.
o Press the CAM key.
o Press 6.
o Press the CALL key.
o Preset 6 of camera n° will be displayed.
e. Deleting a Preset
• Select the desired camera number and press the CAM key.
• Define the preset (1 - 128) and press the DEL key.
• The preset has been deleted.
Example: Deleting preset 2 of camera n° 3.
o Press 3.
o Press the CAM key.
o Press 2.
o Press the DEL key.
o The preset has been deleted.
CAMCOLD4_v2 7 VELLEMAN