Technical Information; Unfolding And Folding The Wheelchair - Orliman actius ACWC05 41 Instrucciones De Uso

7. INSTRUCTIONS FOR USE AND MOUNTING
OPTIONS
This section explains all the possibilities and options of your
wheelchair. It pragmatically discusses all adjustments and
instructions for use such as removing the footrests, etc.

7.1. Technical information

ACWC05#41/45
Seat width
Seat depth
Seat height
Backrest height
Total width
Total length
Total height
Width (folded)
Armrest height (adjustable)
Total weight
Wheelchair weight without removable
wheels
Weight of loose wheel
Weight footrest
Maximum occupant weight
Dimensions to take into account when
moving chairs through doors

7.2. Unfolding and folding the wheelchair

⇢
Unfolding the wheelchair:
Make sure you stand next to the wheelchair;
Grab both seat tubes and move them apart;
Push both seat tubes downwards so that the wheelchair will
unfold as shown in picture 1;
Go to the front of the wheelchair and push the seat tubes
towards the side frame. Check to ensure the seat tubes are
directly over the side frame and the seat upholstery is flat.
Reposition the seat pad and backrest pad and fold out the
footplates.
You can now use the wheelchair.
⇢
Folding the wheelchair:
Fold away the footplates and remove the footrests;
Remove the seat pad and backrest pad;
Make sure you stand next to the wheelchair;
Place one hand at the front in the middle of the seat uphols-
tery and one hand at the rear side in the middle of the seat
upholstery. Pull the seat upholstery straight up, as shown in
picture 2.
410/450 mm
420 mm
540 mm
Image n 1
420 mm
Seat width + 150
7.3. Using the footrest.
mm
1080 mm ⇢
(incl foo-
Folding the footplate away:
trest)
Go to the front of the wheelchair and grab the front of the
950 mm
footplate, as shown in picture 3.
300 mm
Fold the footplate as indicated in picture 4.
160 mm
13.80 kg
10.24 kg
1.79 kg
0.56 kg
110 kg
Seat Width as per
the model + 205
mm
Image n 3
⇢
Removing the footrest from the wheelchair:
Stand in front of the wheelchair.
Pull the control lever upwards, as shown in picture 5. You can
now swing the footrest inwards or outwards.
Swing the footrests 90º away to the outside of the wheel-
chair and pull the complete footrest straight upwards from
the fixation points, as shown in picture 6.
Image n 5
Image n 2
Image n 4
Image n 6