Cleaning And Care - Mondial VIP CARE TRAVEL IRON Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

CLEANING AND CARE

1.
Turn the temperature control dial(6) to "OFF", then disconnect the iron from the wall
outlet and let it cool down completely.
2.
Deposits and other residues on the sole plate can be removed with a cloth soaked
in a vinegar/water solution.
3.
The casing may the wiped with a damp cloth and then polished with a dry one.
4.
Never use any abrasives to clean the sole plate.
5.
Keep the sole plate smooth; avoid contact with metal objects.
Storage
˃
Turn the temperature control dial(6) to "OFF" and set the steam control knob (3) to
position"0"(=no steam).
Disconnect the iron from the wall outlet.
˃
˃
Pour any remaining water out of the water tank.
˃
Stand the iron upright and let it cool down completely.
The power cord can then be round around the iron.
˃
Always store the iron in an upright position.
˃
Safety protective cut-out
In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent
the iron overheating. Then the iron should be taken to the nearest authorized service facility.
SAFETY
General Information
˃
Read the instructions carefully and keep for future reference.
˃
Use the appliance following the instructions for use.
Use the appliance for domestic purposes only. Commercial use implies the
˃
cancellation of the warranty.
˃
The use of the appliance by children or persons with physical, sensory, mental or
motor disabilities, and without knowledge and experience, can lead to dangerous
situations. Those responsible for the safety of these people should convey clear
instructions or supervise the appliance's use.
˃
Do not allow children to play with the appliance.
˃
Do not handle or try to repair the system on your own. In case of incident, please
contact our technical service to avoid risks.
Use only original parts and accessories of the appliance. Never use parts of
˃
another appliance or with defects.
Electricity and heat sources
Before connecting the appliance, ensure that the supply voltage corresponds to
˃
the voltage indicated on the plate along with the your appliance's features.
˃
Use a power outlet with grounding.
˃
Always remove the power jack connector when not using the appliance.
The unit is not enabled for use with an external timer or remote control.
˃
16
UK
E
˃
When unplugging the connector, be sure to pull the plug, not the cord.
Do not use the appliance if the cable is damaged. Contact our technical service to
˃
avoid risks.
˃
Damaged cables of this appliance should only be repaired by our technical
service.
˃
Make sure that neither the appliance nor the cable or the connector are in contact
with heat sources, for example, with a hot plate counter top with fire or other heat
sources.
˃
Ensure that neither the appliance nor the cable or the connector are wet or in
contact with water.
Ensure that there is enough free around it and that it does not make contact with
˃
flammable materials.
˃
Do not cover the appliance when connected to the mains and running.
˃
Keep the electrical connection cable always collected in the cable winder to carry
and when not in use.
Do not connect the appliance under the multiple sockets or overloaded extension
˃
cords, because overloading can damage the product and cause accidents.
During use
When using electrical appliances, always follow basic safety precautions,
including the following:
To protect against electrical shock, do not immerse cord, plug or appliance in water
˃
or any other liquid.
˃
Use this product only for the purposes described in this manual. Do not use
attachments or accessories not recommended by Mondial.
˃
The unit is designed for home use only and not applicable in commercial use.
Outdoor use is recommended only in dry weather. If necessary, use sufficient
˃
extension cord connected to grounding (min. 3mm2).
˃
Do not use it outdoors, in places without the inflow of oxygen, or in the presence of
explosive and/or flammable gases.
Children should be supervised when using the appliance.
˃
Place the appliance on a flat, stable, heat-resistant surface, protected against
˃
possible splashing water or other liquids.
˃
Do not allow the cord to hang over the table or other work surfaces.
Make sure that your hands are dry when you touch the cord or plug.
˃
Turn off the machine and unplug it from the power supply if it malfunctions during
˃
use, when you want to clean it, or after using it.
˃
Try to leave enough ventilation around the unit while in use.
Do not leave the appliance unattended while in use.
˃
Be careful when using the appliance. The appliance heats up and can cause burns
˃
to the touch.
˃
Do not take the appliance if it falls into water. Immediately remove the plug from the
power outlet. Do not reuse the appliance and contact the authorized technical
service center for servicing.
˃
Do not use appliance for anything other than intended use.
˃
The iron should always be switched off before connecting or disconnecting from
the power supply. Do not pull on the cord to disconnect the plug from the wall
UK
E
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F-46

Tabla de contenido