Pre Operation; Important; Feeding Procedures - Skymsen CMFL-550 Manual De Instrucciones

Lift the Receiving Tray up to its working position,
matching the Tray orifices to the frame threaded
pins .
Pic.05
After the Receiving Tray is suitably placed , put
the 2 washers and tight the nuts till the
Receiving Tray is securely fixed .
Pic.06
2.1.3 The network voltage shall be the same as machine motor voltage .
2.1.4 Verify the rollers rotation direction, it shall match the rotation label
sticked to the machine side .
2.1.5 Grounding is mandatory .

2.2 Pre Operation

Under no circumstances use the machine if its protections are not
properly fitted and never clean the rollers with the machine
First of all check if the Dough Roller is firm in its position. Prior to
use, clean the rollers with a dry cloth and a plastic spatula if necessary.
2.3 Feeding Procedure
Under no circumstances remove any dough residue from between
the rollers with your hands.
To feed the Dough Roller put the dough on the feeding tray or on
the conductor roller and push it until it gets grabbed by the rollers,
taking care for your hands not to over pass the upper protection.

IMPORTANT

plugged in.
IMPORTANT
4