Installation And Pre Operation; Installation; Electrical Installation - Skymsen AMP-400 Manual De Instrucciones

PICTURE 02 (Flat Side) PICTURE 03 (Grooved Side)

2. Installation and Pre Operation

2.1 Installation

2.1.1 Placing
Your equipment must be placed and levelled on a dry and firm surface with, preferably, 33
inches high.
33 inches
850 mm

2.1.2 Electrical Installation

Please verify the voltage informed on the label attached to the cord when you unpack it.
The feeding cord has 3 pins, the central pin is for grounding.
It is mandatory that all 3 pins are correctly connected before turning the equipment on.
IMPORTANT
Make sure the network voltage is the same as indicated on the cord label.
7