Fracarro KCPN Instrucciones De Funcionamiento página 11

1. Adjacent channels (analogue + digital) - Signals coming from more antennas should not be mixed before
entering the modules.
2. Conversion of strong signals - With very high level signals, we recommend distributing the signals to the various
modules by means of passive splitters in order to avoid the saturation of the input stages.
3. Analogue channels with a level difference higher than 15 dB - If the analogue channel level to be converted is
less than 15dB from the level of the other channels, use a KF filter to filter and amplify the channel.
4. For the AGC to operate properly, we recommend equalizing the level of the input channels as much as possible.
SIGMA 6HD
DE4-12
KP35
KD100
CP CP CP
35
Freq. In 1204
Lev Out 15
FRACARRO
TPE
5. TYPICAL INSTALLATION EXAMPLE
BLU425F
.. .. ..
KF/..
OUTPUT
SIGNAL
SIGMA 6HD
KP35
KD100
CP CP CP
35
Freq. In 1204
Lev Out 15
FRACARRO
TPE
SIGMA 6HD
..
KP35
KD100
C P C P C P
35
Freq. In 1204
Lev Out 15
FRACARRO
TPE
11
BLU425F
BLU424F
.. .. ..
KF/..
OUTPUT
SIGNAL
BLU425F
.. ..
.. .. ..
KF/..
OUTPUT
SIGNAL