Starting, Operation - WIKA WU-20 Manual De Instrucciones

7. Starting, operation

7. Starting, operation
Required tools: wrench (flats 19 and 16), screw driver (0.040" to 0.060" / 1 to 1.5 mm) and a pair
of scissors, allen key for WU-26
Mechanical connection
Use this spanner flat
for screwing in!
8 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio, WU-2X
Don't use this
spanner flat!
Product label (example)
PIN assignment
P # Product No. Signal
S # Serial No. Power Supply
GB
Coded manufacture date