Final Steps Before System Learning - Accessmatic cyborg Panther 1200 Manual De Usuario

Fasten the (12) Door bracket and (16) Door bracket
4
locator on the center of the garage door. Connect
(14) Curved arm to (12) Door bracket.
3.6 Final steps before the system learning
1. Install the (18) Blocker at the door open position.
2. Attach the warning sign to the (7) Emergency release rope.
3. Connect the power to the motor. Ensure the electric plug and socket are well connected.
1
1200
2
Connect the (14) Curved arm and the (15)
5
straight arm with bolts and nuts.
3
WARNING
To prevent possible SERIOUS INJURY or DEATH from
electrocution or re:
• Ensure power is not connected to the opener, and
disconnect power from the circuit BEFORE removing
cover to establish permanent wiring connection.
• Garage door installation and wiring ARE in complian-
ce with all local electrical and building codes.
• NEVER use an extension cord, 2-wire adapter, or
change plug in ANY way to make it t an outlet. Ensure
the opener is grounded.
Opening your life
8