Zoom In; Talkback; Baby Unit; Volume - NUK Eco Control + Video Manual De Instrucciones

If zoom in (chapt. 7.1.3) is enabled, you cannot adjust the volume. Switch zoom in off first.
Note
7.1.3

Zoom In

Press the button to see a close-up of the image on screen. Press the button again for normal
view. You are able to magnify parts of the image on the screen. Use the
buttons to move up, down, left or right to the image part you want to magnify.
7.1.4

Talkback

Press the button (chapt. 1.3) to talk back to the baby unit. You can talk for as long as you
TALK
hold the button pressed down. If required adjust the volume on the baby unit (chapt. 7.2.1).
If you have activated the lullabies, they will be temporarily interrupted during the talkback.
Note
7.2

BABY UNIT

7.2.1

Volume

On the baby unit, you can adjust the volume by pressing the
increase the volume. The
lullabies or your voice when you use talkback (chapt. 7.1.4).
7.2.2

Lullabies

You can play lullabies from the baby unit. You can start and stop these lullabies directly on the
baby unit or via the parent unit (chapt. 7.1.1).
1. Press the
2. Lullaby 1 is played repeatedly for 15 minutes.
3. Press the
The lullaby stops playing automatically after 15 minutes. You can stop it before that time by
pressing the button at the baby unit.
You can select for playing only one song at a time. If you want to select all songs for playing
one after another: Start the lullabies from the parent unit (chapt. 7.1.1).
7.2.3

Temperature Indicator

The temperature sensor is located on the back of the baby unit (fig. 8). To ensure an accurate
reading you should not cover this sensor or place the unit in direct sunlight. You should also
avoid placing the unit next to a heating appliance (e.g. light bulbs). The temperature range is
from 11°C to 30°C (52 °F to 86°F).
The temperature indication is merely indicative and not a precise value.
Note
7.2.4

Automatic Night Vision

The baby unit includes 8 built-in infrared LEDs. These LEDs are automatically switched on
when it becomes dark around the baby unit. They are automatically switched off when it
becomes light. The LEDs illuminate objects up to a distance of approximately 1 meter (3 ft.).
When the night vision LEDs are switched on, the image on the screen of the parent unit
Note
will appear in black and white.
-
button will decrease it. The set volume is used for playing the
button to start the lullabies.
button to select the next lullaby.
+
and
46
or or ⊳ or
- +
buttons. The button will