GE CT9070SH3SS Instrucciones De Instalación página 5

5
THREE-CONDUCTOR BRANCH CIRCUIT CONNECTION
NOTE: If residence leads are aluminum conductors, see
WARNING in Section 3, Electrical Requirements.
When connecting to a three-conductor branch circuit, if local
codes permit:
A. Connect the oven ground conductor along with the neutral
(white) lead to the branch circuit neutral (white or gray in
color), using a wire nut.
B. Connect the oven red lead to the branch circuit red lead
and the oven black lead to the branch circuit black lead in
accordance with local codes, using wire nuts.
C. Install proper strain relief clamp.
D. Install junction box cover.
6
FOUR-CONDUCTOR BRANCH CIRCUIT CONNECTION
NOTE: If residence leads or ground are aluminum conductors, see WARNING in Section 3, Electrical
Requirements.
When connecting to a four-conductor branch circuit, if local codes permit:
A. Free the neutral (white) lead from being restrained to any other
wires. If necessary, cut the neutral (white) lead and then re-strip
it to expose the proper length of conductor.
B. Attach the appliance grounding lead (green or bare copper) in
accordance with local codes.
C. Connect the oven neutral (white) lead to the branch circuit
neutral (white or gray) in accordance with local codes, using
a wire nut.
D. Connect the oven red lead to the branch circuit red lead
and the oven black lead to the branch circuit black lead in
accordance with local codes, using wire nuts.
E. Install proper strain relief clamp.
F. Install junction box cover.
Black
Range
Branch
conduit
circuit
snaps
Alternate
into box
knockout
Tape or Crimp
Red
Ground and
neutral wires (white)
Neutral wire
connection
Junction Box Cover
Black
Range
Branch
conduit
circuit
snaps
into box
Ground
wires
Alternate
Red
knockout
White
Junction Box Cover
7
SLIDE OVEN INTO OPENING
• Lift oven into cabinet cutout using the
oven opening as a grip. Carefully push
against oven front frame. Do not push
against outside edges.