Topping Up The Oil; Return To Cembre For Overhaul - Cembre B68M-P18 Manual De Uso

5.2) Canvas bag
To protect the pump from accidental damage and dust, it should be stored with its accessories in
the special canvas bag provided and sealed well.
Canvas bag type CVB-031: Size 620x300x320 mm (24.4x11.8x12.6 inches), weight 2,4 kg (5.3 lbs).
5.3) Storage
Once the job has been completed always completely release the pressure of the oil by holding
down the release button; ensure that the ram of the connected hydraulic head is completely
retracted before disconnecting the head.
Remove the battery from the pump.
Disconnect the remote controller.
Disconnect the fl exible hose; avoid it becoming folded with narrow bends or knots that may
compromise its integrity.
Store the pump and accessories in the canvas bag in a dry place.

5.4) Topping up the oil

Periodically check, at least every 6 months, the oil level in the pump and top up if necessary:
Position the pump on its base on a fl at surface.
Completely discharge the oil pressure by pushing the pressure release button (6).
Unscrew the fi ller cap (11).
By using a funnel, top up very slowly to completely fi ll the oil reservoir to the maximum level.
When the operation is fi nished replace the cap (11).
Always use clean recommended oil, see § 1.
Do not use old or recycled oil. Do not use hydraulic brake fl uid.
Ensure that used oil is disposed of in accordance with current legislation.

6. RETURN TO Cembre FOR OVERHAUL

In the case of a breakdown contact our Area Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if pos-
sible, attach a copy of the Test Certifi cate supplied by Cembre together with the tool or fi ll in and
attach the form available in the "ASSISTANCE" section of the Cembre website.
_________________________________________________________________________________________
Following information applies in member states of the European Union:
USER INFORMATION in accordance with "Directives 2011/65/EU and 2012/19/EU.
The 'Not in the bin' symbol above when shown on equipment or packaging means that the equipment
must, at the end of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed
guidelines for its separate collection. Appropriate waste separation, collection, environmentally compat-
ible treatment and disposal is intended to reduce harmful environmental eff ects and promote the reuse
and recycling of materials contained in the equipment. Unlawful disposal of such equipment will be
subject to the application of administrative sanctions provided by current legislation.
(Ref. to Fig. 6)
18