In order to avoid any danger linked to an untimely
restart of the thermal circuit breaker, this appliance
should not be powered through an external switch, such
as a timer, or be connected to a circuit which is regularly
switched off and on by the electricity provider.
When using an extension cord, it must be unwound fully
to prevent the cable from overheating.
Always connect and disconnect the power lead when the
temperature is set to the minimum and to stop.
The
symbol represents the equipotential bonding
conductor located on the underside of the appliance.
To guard against electric shocks, do not immerse the
lead, connector or body of the appliance in water or any
other liquid. Do not handle with wet hands.
Do not leave the lead hanging from a table or counter.
Do not place the appliance and its lead on or near a
surface which is likely to become hot (cooking plate, gas
burner, oven, etc.).
Disconnect the plug when the appliance is not in use or
before cleaning.
Do not clean the appliance with a high or low pressure
water spray.
Do not use chlorinated products to clean stainless steel.
Do not handle the appliance when hot.
Do not touch the hot surfaces.
Leave the appliance to cool down before handling or
cleaning it.
This appliance is intended for indoor use.
- 15 -