Technical Data; Intended Use - Festool SYSLITE STL 450 Manual De Instrucciones Original

placed by the manufacturer or a cus-
tomer service workshop in order to
ensure that your device operates re-
liably.
– Check the mains plug and the power
cable regularly in order to prevent a
hazard.Disconnect
power cables from the power supply
immediately and have them replaced
by an authorised service workshop.
– When placing the device on a tripod,
ensure that it is stable. In the event
of unstable footing or insecure
mounting, the device may fall and
cause physical injury, electric shock
or material damage.
– Place the tripod on a dry, level and
stable surface. If the legs of the tri-
pod are not folded out to the limit
4

Technical data

Grazing light
Nominal voltage
Frequency
Lighting device
Maximum output
LED luminous flux
Colour temperature
Colour rendering index, Ra
Service life (L70)
Permitted operating temperature range
Maximum height (upper edge of grazing
light range) with adapter and tripod
any damaged
stop or if the tripod has unstable
footing, this can cause physical inju-
ry, electric shock or material dam-
age.
– Discontinue use if device is damaged.
– Device is no toy! Keep away from
children.
3

Intended use

The grazing light is designed for inspect-
ing surfaces when working on rough sur-
face areas. Ensure the electrical safety of
all electricity sources.
The device is not suitable for illuminating
rooms in residential buildings.
The user is liable for improper
or non-intended use.
64 x 0,25 W LED 5000 K
GB
STL 450
STL 450
220-240 V
50/60 Hz
18 W
1200 lm
5000 K
>80
>10,000 h
-10°C to +45°C
2.50 m
13