Custom Wood Panel - KitchenAid KUIX535HBS00 Instrucciones De Instalación

Custom Wood Panel

Custom Panel Dimensions
If you plan to install a custom overlay panel, you will need to
make the panel yourself or consult qualified cabinetmaker or
carpenter
IMPORTANT:
The thickness of overlay panel must be 3/4" (1.91 cm).
■
Overlay panel must not weigh more than 8lbs (3.62 kg).
■
Overlay panels weighing more than recommended may cause
■
damage to your ice maker.
Match wood grain direction with that of adjacent cabinets.
■
Sand panel edges to provide a smooth finish.
■
Use moisture sealer on both sides and all edges of the panel
■
to avoid damage from outside.
Option 1 - Without Hinge-Side Spacer
To allow proper clearance for the door, prepare the custom
overlay panel using the dimension shown.
14¹⁷⁄₃₂"
(36.9 cm)
1¹⁄₄"
(3.18 cm)
3/4"
(1.91 mm)
1/4"
(6.35 mm)
14
29¹⁄₂"
(74.9 cm)
1¹⁄₄"
(3.18 cm)
3/4"
(1.91 mm)
1/4"
(6.35 mm)
Option 2 - With Hinge-Side Spacer
To achieve a flush installation with adjacent cabinets, prepare the
custom overlay panel using the dimensions shown.
14⁵⁄₈"
(37.1 cm)
Top of Panel
A
A. Front-visible surface when installed
B. Hinge Side
Bottom of Panel
A. Front-visible surface when installed
B. Hinge Side
29¹⁄₂"
(74.9 cm)
A
B
B