Toshiba TEC B-480-QP Serie Manual De Instrucciones página 25

9. GENERAL MAINTENANCE
Cleaning the Cutter Unit
WARNING:
1. Be sure to turn the power off before cleaning the cutter unit.
2. The cutters are sharp and care should be taken not to injure yourself when cleaning.
The swing cutter and rotary cutter are available as an option. They are both cleaned in the same way
regardless of different shapes. Now, how to clean the cutter unit installing the swing cutter will be
introduced.
1. Loosen two screws and remove the cutter cover.
2. Remove the white screw and media guide.
3. Remove the jammed paper and trash.
4. Clean the cutter with dry cloth.
5. Assembling is reverse order of removal.
White Screw
(24741710304)
Cutter Cover
Media Guide
Screw
Swing Cutter
E9-3
ENGLISH VERSION EO1-33007
9.3 Removing Jammed Paper
Fixed Cutter
Cutter Unit
Fig. 9-3