General Settings - MINOX ACX 400 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

White balance
The white balance is pre-set to „Automatic". If you make modifications
here, please remember to adjust the setting again when the light conditions
change.
ISO
This is where the sensor light sensitivity can be regulated. This is again set
to „Auto". We recommend that you change the settings only under specific
circumstances.
Time stamp
Here you can define whether a time stamp should be faded on to the video
or the photo.
Rotation
This rotates the picture on the screen.

4.4 General settings

Once more you navigate with the main switch and confirm by pressing the
shutter release.
46
Control
Here the volume of the microphone and the speakers, as well as the bright-
ness of the LCD screen, can be adjusted.
Beep
Here you can turn the beep, which is heard when the control buttons are
pressed, on or off.
LED status displays
Here the LED status displays can be turned on or off.
Wi-Fi
Here the Wi-Fi data transfer can be turned on or off.
Wi-Fi Info
This displays the current Wi-Fi SSID and the password.
RF-CTRL
This function activates the camera for operation in radio remote control
(remote watch): If you wish to use remote control, the RF-CTRL must be
switched on here. Afterwards you can change to the live view screen.
For the use of remote control see Chapter 6.
47

Publicidad

Tabla de contenido
loading

Tabla de contenido