• If you press any key while the lighting
of the control panel is off, the current
machine settings will reappear on the
display to let you make any change you
wish.
• If you do not cancel the screen saving
mode or press any key for 30 seconds,
control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of
all, you need to press any key to activate
the keys, select "-20" set value and then
press and hold the freezer set button for
10 seconds.
• To reactivate screen saving mode, select
"-20" set value and then press and hold
the freezer set button for 10 seconds.
3.3.4 Freezer Temperature Settings
• The initial temperature value for the
freezer setting indicator is -18
(
).
• Press the freezer set button once.
• When you first press the button, the
previous value will appear on the setting
indicator of the freezer.
• Whenever you press this button, a lower
temperature will be set (-24 °C, -22 °C,
-20 °C, -18 °C (economy), -16 °C or
super freeze).
• If you press the freezer set button
until the super freeze symbol (
appears on the freezer setting indicator,
and do not press any buttons for 1
second, super freeze will flash.
• If you continue to press the same button,
it will restart from -16 °C.
Recommended Temperature Values for
Freezer
When to adjust
For minimum freezing capacity
In normal usage
For maximum freezing capacity.
3.3.5 Door Open Alarm Function
If freezer door is opened more than 2
minutes, appliance sounds 'beep beep'.
/ economy
o
)
Inner
Temperature (
C)
o
-16,
-18, -20, -22
-24
EN - 12
3.4 Temperature Adjustment Warnings
• It is not recommended that you operate
your freezer in environments colder than
10°C in terms of its efficiency.
• Do not start another adjustment while you
are already making an adjustment.
• Temperature adjustments should be
made according to the frequency of door
openings, the quantity of food kept inside
the freezer and the ambient temperature
in the location of your freezer.
• In order to allow your freezer to reach
the operating temperature after being
connected to mains, do not open the
door frequently or place large quantities
of food in the freezer. Please note that,
depending on the ambient temperature,
it may take 24 hours for your freezer to
reach the operating temperature.
• A 5 minute delay function is applied
to prevent damage to the compressor
of your freezer when connecting or
disconnecting to mains, or when an
energy breakdown occurs. Your freezer
will begin to operate normally after 5
minutes.
• Your appliance is designed to operate in
the ambient temperature (T/SN = 10°C
- 43°C) intervals stated in the standards,
according to the climate class displayed
on the information label. We do not
recommend operating your appliance out
of the stated temperature limits in terms
of cooling effectiveness.
Climate
Class
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)
Important installation instructions
This appliance is designed to work in
difficult climate conditions (up to 43
degrees C or 110 degrees F) and is
powered with 'Freezer Shield' technology
which ensures that the frozen food in the
Ambient Temperature
o
C