Before Calling After-Sales Service - Sauber 5-186I-C Serie Manual De Usuario

7 BEFORE CALLING AFTER-
SALES SERVICE
Errors
Your freezer will warn you if the
temperatures for the freezer is at improper
levels or if a problem occurs with the
appliance. SR Alarm indicator (
displayed in the control panel.
ERROR TYPE
MEANING
WHY
WHAT TO DO
If you are experiencing a problem with your
freezer, please check the following before
contacting the after-sales service.
Your freezer is not operating
Check if:
• There is power
• The plug is correctly placed in the socket
• The plug fuse or the mains fuse has
blown
• The socket is faulty. Examine this by
plugging your freezer into a working
socket.
A rise in the temperature may be caused
by:
• Opening the doors frequently for long
periods of time
• Loading the appliance with large
quantities of warm foods
• A high ambient temperature
• An error with the appliance.
) is
( ! ) SR alarm indicator
There is/are some part(s) out
of order or there is a failure in
the cooling process.
The product is plugged for the
first time or a long-time power
interruption for 1 hour.
Check the door is open or
not and check if the product
working 1 hour. If the door is
not open and the product had
worked 1 hour, call service
for assistance as soon as
possible.
Call a service agent for
assistance as soon as
possible.
Your freezer is operating noisily
Normal noises
Cracking (ice cracking) noise occurs:
• During automatic defrosting
• When the appliance is cooled
or warmed (due to expansion of
appliance material).
Short cracking noise occurs: When
the thermostat switches the compressor
on/off.
Motor noise: Indicates the compressor
is operating normally. The compressor
may cause more noise for a short time
when it is first activated.
Bubbling noise and splash occurs:
Due to the flow of the refrigerant in the
tubes of the system.
Water flowing noise occurs: Due
to water flowing to the evaporation
container. This noise is normal during
defrosting.
Air blowing noise occurs: In No-Frost
freezers during normal operation of the
system due to the circulation of air.
The edges of the freezer in contact with
the door joint are warm
Especially during summer (warm seasons),
the surfaces in contact with the door joint
may become warmer during the operation
of the compressor, this is normal.
There is a build-up of humidity inside
the freezer
Check if:
• All food is packed properly. Containers
must be dry before being placed in the
freezer.
• The freezer door is opened frequently.
Humidity of the room enters the freezer
when the doors are opened. Humidity
increases faster when the doors are
opened more frequently, especially if the
humidity of the room is high.
• There is a build-up of water droplets
on the rear wall. This is normal after
automatic defrosting (in Static Models).
EN - 18