Information Codes; Checklist - Samsung POWERbot SR20J90 U Serie Manual Del Usuario

information codes

1
The information
codes below
appear on the
display panel
Information codes
2
If a code appears,
turn off the
emergency
switch and check
the instructions
below and take
appropriate action
the poWerbot is caught, stuck, trapped or lifted while
moving around.
fTurn off the emergency switch and move the POWERbot to another
area.
foreign matter caught in the power brush.
fTurn off the emergency switch and remove the foreign matter from the
Power brush.
foreign matter caught in the left Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
foreign matter caught in the right Driving wheel.
fTurn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
fTurn off the emergency switch and turn it back on.
fContact a service center if information code does not disappear.
foreign matter accumulated on the obstacle sensor.
fTurn off the emergency switch and clean the front and rear sensor
with a soft cloth.
foreign matter accumulated on the cliff sensor.
fTurn off the emergency switch and clean the cliff sensor with a soft
cloth.
ENGLISH-20
3
The information
code will disappear
when you turn on
the emergency
switch

checklist