Beper BG.010Y Manual De Instrucciones página 10

Ice Cream Maker Use instructions
Assembly of the appliance:
Turn the motor unit (1) and insert the axis of the blade (3).
Insert the motor unit in the transparent cover (4).
Attach the blade (5).
Remove the cooling bowl (6) from the freezer and ensure it is completely frozen. Secure the motor
unit and cover to the bowl by turning it clockwise.
Press the power button (2) to start the blade rotating.
Immediately pour in your mixture of ingredients through the opening located on top of the transpa-
rent cover.
Let the unit run for about 20-40 minutes. The maximum operating time is one hour.
Comment: The consistency of "homemade" ice cream is often softer than industrial produced ice
cream. If your ice cream is too liquefied, pour it into another container using a rubber spatula or
wooden spoon. Place this container in the freezer to harden the ice cream.
Maintenance:
The cooling bowl, blade, and the cover can be washed in warm water with a mild detergent. Rinse
thoroughly. Do not put any parts in the dishwasher.
The motor unit can be cleaned using a warm, damp cloth. And never immerse the motor unit in wa-
ter. Make sure all parts are completely dry before storing. Never put the ice pack in the freezer if it
is still damp. Never store the motor unit, blade or axis in the freezer.
Technical Features
Capacity : 0.75L
Power : 7W
Voltage : 220- 240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
10