Raise And Lower Monitor Screen; Screen Rotation - NEC MultiSync LCD1990FXp Manual Del Usuario

Raise and Lower Monitor Screen

The monitor may be raised or lowered in either Portrait or Landscape mode.
To raise or lower screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom.
Raise or lower to desired height (Figure RL.1).
NOTE: Handle with care when raising or lowering the monitor screen.

Screen Rotation

Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your
fingers.
To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to
the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape (Figure R.1).
To rotate OSM menu between landscape and portrait, refer to "Controls" section.
Tilt
With one hand, grip the top of the display by the handle
using the other hand to grip the bottom. Tilt to desired angle
(Figure TS.1).
NOTE: Handle with care when tilting the monitor screen.
01_English
Figure TS.1
5
Figure RL.1
Figure R.1
Swivel
Grasp both sides of the monitor screen with your hands and
adjust the swivel as desired (Figure TS.2).
English-5
12/6/06, 13:40
Figure TS.2