Log In As The Administrator; Set The System Settings - Beckman Coulter QbD1200 Manual Del Usuario

Icon
Startup

Log in as the administrator

1. Push Log In on the home screen.
2. Select "admin" from the list of users.
3. Enter the password: password
4. Enter a new password.
Make sure to record the new password.
5. Push Save.
6. After successful log in as the administrator, make specified user profiles. Refer to
remove a user on page 14.
Operation
Configuration

Set the system settings

Use the touch screen or connect a USB keyboard and a USB mouse to do the steps that follow.
Table 1 Icon description (continued)
Description
Configures the instrument settings.
Starts the qualification procedures: calibration, SST500, background, SDBS,
SST8000 and accuracy tests.
Shows the maintenance procedures for the instrument.
Shows help and more information.
Shows when a user is logged into the instrument.
Shows when no user is logged into the instrument.
Selects the previous screen.
Saves the information on the selected screen and moves to the next screen. If this arrow
is selected at the end of a configuration, a procedure starts.
Shows the currently-selected screen.
Add, change or
English 13