Set Up: Pc / Mac - PDP NUR Manual Del Usuario

set uP: Playstation
1. Plug the micro usB cable into the Afterglow transmitter Dock/stand and into an active
usB port on the Playstation 3 console. Your Dock's LED light will flash, indicating that it is
®
on and searching for your headset.
2. Plug one end of the included optical cable into the wireless transmitter and the other end
into the Playstation 3 console.
®
3. Press and hold the large on/oFF button on your headset to power it on. the alternating
leD colors of the headset ear cup will indicate the headset is searching for your wireless
transmitter. When the headset ear cup and transmitter dock leD turn a solid blue, your
headset and transmitter are communicating.
4. check to make sure your headset is recognized by your Playstation
console's sound settings.
3 english
®
3 by checking your
®

set uP: Pc / Mac

1. Plug the micro usB end of the provided cable into the Afterglow transmitter Dock and the
other side into a USB port on your PC. Your transmitter's LED light will flash, indicating that
it is on and searching for a headset.
2. Plug one end of the grey 3.5mm cable into an aux port in your Pc, and the other end into
the 3.5mm analog port in your wireless transmitter.
*if your Pc has an optical output, you may connect your wireless transmitter using the
included optical cable instead of the 3.5mm cable.
3. Press and hold the large on/oFF button on your headset to power on. the alternating leD
colors on the ear cup indicate the headset is searching for your wireless transmitter. When
the ear cup and transmitter leD turns a solid blue, your headset and transmitter
are communicating.
** For passive use, simply plug one end of the grey 3.5mm cable into an analog jack in your Pc
and the other end into your headset.
4. Make sure your Afterglow wireless headset is chosen as an audio out on your Pc: right click
the small speaker icon in the bottom tool bar > select "Volume options" > select Afterglow
headset under "sound Devices". You can further adjust the volume on your headset through
your Pc through your audio settings indicated by a small speaker.
english