Battery Life - PDP NUR Manual Del Usuario

chArging
aFterGlow Headset Headset oFFers two cHarGinG MetHods:
1) Via provided play&charge cable – which let's you charge the headset while in use
2) Via transmitter/charging Dock:
a. You can place the Afterglow headset on the charging dock in both possible positions
b. You can tell that the headset is charging as the earcup lights start pulsating
c. once the headset is fully charged, the earcup lights will stay solid
d. You can unscrew the transmitter/charging dock from its stand and wall/desk mount it.
use the provided template to make sure it is leveled on your wall or desk.

BAtterY liFe

yoUr aFterGlow Headset is enGineered to Provide GaMers UP to 10 HoUrs
oF battery liFe on a sinGle cHarGe.
low battery:
• Your Afterglow Headset will alert you when the battery life is low.
• When your headset has about 10 minutes of power left, your headset's LED ear cup
lights will shut off, but you will still be able to hear your game and chat audio.
• For a full battery charge, your headset will need a few hours to charge. You may con-
tinue using your headset while charging by connecting the Play & charge cable to your
headset and an active usB port.
led cHarGinG indication:
• When charging, the ear cup lights will pulsate, which indicates charging.
• When fully charged, the ear cup lights will go back to your set lighting color.
english trouBleshooting
i cannot hear game audio – make sure...
• The Afterglow transmitter and charging dock is connected to the USB port on your
Playstation
• Your headset is turned on and paired with the transmitter dock.
• Your Afterglow transmitter and charging dock are paired successfully. This is indicated
by a solid leD on the Afterglow transmitter and charging dock and the ear cups.
• Your volume is turned up.
• Your headset is recognized as an audio out for your system.
i cannot hear others – make sure...
english
• Your chat volume dial is turned up.
• You have enabled "chat audio" in your PlayStation
others cannot hear me – make sure...
• Your headset is ON and paired with your wireless transmitter. This is indicated by a
solid leD on the ear cup and the Afterglow transmitter and charging dock.
• Your mic is not muted. Click the large MUTE button on the left ear cup to mute and
unmute yourself. **note: When you mute your microphone, a voice cue will tell you
"comms disabled"
• On a PC, make sure your headset is selected as a microphone input by right clicking
the speaker icon in your bottom tool bar > recording Devices > select headset
microphone.
My headset and transmitter are not paired – make sure ...
• Your headset is not in passive mode. To take your headset out of mobile mode, turn
your headset off by holding down the mute button for 3 seconds until you hear a beep.
When you turn your headset back on, it will not be in mobile mode.
• Your Afterglow transmitter and charging dock and ear cups (with the lighting switch on
the automatic or manual mode) are a solid light. this indicates that your headset and
transmitter are paired.
• The Afterglow transmitter and charging dock is plugged into an active USB port.
• Your headset's battery is not completely dead.
4 system and the system is on.
®
english
® 3 or 4 sound settings.