Bluetooth - Reiner jetStamp graphic 970 Manual De Instrucciones

jetStamp graphic 970

1.4. Bluetooth

Print image 3
Print image 4
Clean
Online/Bluetooth
Bluetooth cannot be activated while an a USB connection is active.With an active
Bluetooth connection, a USB connection cannot be established either.
To activate Bluetooth at the device, the setting wheel
f
Online/Bluetooth.
A jetStamp graphic 970 with the serial number 123 then becomes visible under the name
970-000123 for other Bluetooth devices.
To establish a connection, the factory password "0000" is needed.
If Bluetooth is active, the battery runtime reduces since Bluetooth is active in standby
mode as well.
54
Print image 2
Print image 2
Off
Functions
LED indicator
7
must be turned to position