Symbols On The Product; Type Plate - Husqvarna W50P Manual De Usuario

3. Fuel valve lever
4. Starter rope handle
5. ON/OFF switch
6. Oil tank cap and dipstick
7. Fuel tank cap
8. Discharge outlet
9. Water strainer
10. Air filter cover and air filter
11. Muffler
12. Pump drain cap
13. Suction inlet
14. Frame
15. Pump chamber cap

Symbols on the product

WARNING: Be careful and use the
product correctly. This product can cause
serious injury or death to the operator or
others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection.
This product complies with the applicable
EC Directives.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Risk of sparks.
Keep hands away from the rotating parts.
Do not breathe exhaust fumes. Do not use
a combustion engine product indoors or in
areas that do not have sufficient airflow.
4
Risk of burn injury.
Do not smoke near fuel. Risk of fire.
Low oil level.
Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.

Type plate

Product
Serial No.
Article No.
Model
Inlet / outlet size
Lift
Suction
Engine model
Max discharge
capacity (m³/h)
Max power
Fuel tank capacity
N.W/G.W (kg)
Husqvarna AB
SE-561 82 Huskvarna
Sweden
Prod. year 0000
1421 - 004 - 09.07.2020