Skil 3510 Instrucciones De Funcionamiento página 3

Ocultar thumbs Ver también para 3510:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3510 2610008262 ENG:SM 2610008262 12-09 3/26/10 9:03 AM Page 3
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was
designed.
Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source and/or the battery pack from the
power
tool
adjustments, changing accessories or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Maintain
power
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
before
making
tools.
Check
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
Use the power tool, accessories, tool bits,
etc. in accordance with these instructions,
taking
into
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a
hazardous situation.
Inspect guards before using a tool. Keep
guards in place. Check moving parts for
binding or any other condition that may
affect the normal operation or safety
features of the tool. If damaged, have
tool serviced before using the tool.
Many accidents are caused by poorly
any
maintained tools.
Do not alter or misuse tool. Any alteration
or modification is a misuse and may result in
serious personal injury.
The use of any other accessories not
specified in this manual may create a
hazard. Accessories that may be suitable for
one type of tool may become hazardous
when used on an inappropriate tool.
for
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to follow
maintenance instructions may create a
hazard.
-3-
account
the
working
SERVICE

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido