Before Initial Use; Preparing For Use; Air Frying - STARFRIT 024601 Instrucciones De Uso Y Mantenimiento

BEFORE INITIAL USE

1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance.
3. Thoroughly clean the basket and outer pot in warm soapy water using a non-abrasive
sponge.
Note: You can also clean these parts in the dishwasher.
4. Wipe inside and outside of the appliance with a damp cloth.
NOTE: This is an oil-free fryer that works on hot air, do not fill the outer pot with oil or frying
fat.

PREPARING FOR USE

1. Place the appliance on a stable, horizontal and even surface.
Do not place the item on temperature sensitive surfaces.
2. Place the basket in the outer pot. (P.2 fig.1)
3. Pull the cord from the storage compartment located on the bottom of the appliance and
plug the unit in a corresponding wall outlet (P.2 fig.1).
4. Do not fill the outer pot with oil or any other liquid.
5. Do not put anything on top of the appliance or the airflow will be disrupted and hinder the
air frying result.
TO USE
This appliance can prepare a large range of ingredients. See the cooking guide in this booklet
for food tips and ideas.

Air frying

1. Connect the plug into wall outlet.
2. Carefully pull the outer pot out of the air fryer. (P.2 fig.4)
3. Put the ingredients in the basket. (P.2 fig.5)
4. Slide the outer pot back into the air fryer. (P.2 fig 6)
Carefully align the outer pot with the guides on the body of the fryer.
Never use the outer pot without the basket in it.
Caution: Do not touch the outer pot right after use as it will be very hot. Only hold the
outer pot by the basket handle.
5. Determine the required preparation time for the ingredient (see Cooking Chart for
reference).
6. To switch on the appliance, turn the temperature control knob (P.2 fig.7) to the desired
temperature. Then, turn the timer knob to the desired preparation time (P.2 fig. 7) (see
Cooking Chart for reference).* The POWER indicator light will turn on meaning the unit is
turned on. The WORKING indicator light will also turn on meaning the unit is preheating.
Note: Add 3 minutes to the preparation time when the appliance is cold for preheating.
You can also let the appliance preheat without any ingredients inside. To do this, turn the
timer knob to 3 minutes. Turn the temperature control knob to the desired temperature
and wait until the WORKING indicator light turns off (approx. 3 minutes). Then, pull out
5