melitta MPK001 Manual De Usuario página 4

cleaning. Allow the kettle to cool
before putting on or taking off parts,
and before cleaning the appliance.
● To disconnect, turn any control
EN
wall outlet.
● If the supply cord is damaged, it
must be replaced by the
manufacturer or its service agent or
a similarly qualified person in order
to avoid a hazard.
● Do not use the appliance for other
than intended use.
● The kettle can only use with the
power base provided.
● If the kettle is overfilled, boiling
water may spill out.
● Always ensure the lid is closed
and do not lift it while the water
is boiling. Scalding may occur if
the lid is removed during the
brewing cycles.
● This appliance is intended to be
used in household and similar
applications such as:
- Staff kitchen areas in shops,
offices and other working
environments;
- Farm houses;
- By clients in hotels, motels
and other residential type
environments;
- Bed and breakfast type
environments.
● Do not use the kettle for any
purpose other than heating water.
SAVE THESE INSTRUCTIONS
EXTENSION CORDS
● A short power-supply cord (or detachable
power-supply cord) is provided to reduce
risks resulting from becoming entangled in or
tripping over a longer cord.
● Longer detachable power-supply cords or
ove plug from
extension cords are available and may be
used if care is exercised in their use.
● If a long detachable power-supply cord or
extension cord is used:
1) The marked electrical rating of the
detachable power-supply cord or extension
cord should be at least as great as the
electrical rating of the appliance;
2) If the appliance is of the ungrounded type, the
extension cord should be a ungrounded
type 3-wire cord; and
3) The longer cord should be arranged so that
it will not drape over the counter top or
tabletop where it can be pulled on by
children or tripped over.
BEFORE USING YOUR KETTLE
If you are using the kettle for the first time, it is
recommended that you should clean your kettle
before use by boiling a full kettle of water twice
and then discarding the water. Wipe the surface
with a damp cloth.
OPERATION OF YOUR KETTLE
1. To fill water into the kettle, remove it from the
power base and open the lid, fill with the
desired amount of water to the kettle.
Always fill the kettle between the minimum
and maximum marks. Too little water will
result in the kettle switching off before the
water has boiled.
NOTE: Do not fill the water over the maximum
level, as water may spill out of the spout when
boiling. Ensure that the lid is firmly in place
before plugging the power outlet.
2. Position the kettle on the power base.
3. Connect the plug into power outlet. Turn on
the switch by pressing it, the indicator will
light up.
Then start to boil the water, the kettle will
switch off automatically once the water has
boiled. You can shut off the power by turning
off the switch at any moment during boiling
water. If you want to boil water again, only
turn on the switch directly to restart the kettle.
NOTE: Ensure that switch is free of obstructions
and the lid is firmly closed, the kettle will not
turn off if the switch is constrained or if the
lid is open.
●
●
●
●
●
●
●
●
S
EX
●
●