Craftsman 580.752190 Instrucciones De Uso página 21

Ocultar thumbs Ver también para 580.752190:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Cause
Correction
Pump has following problems:
failure to producepressure,
erratic pressure, chattering, loss
of pressure,low water volume.
Detergent fails to mix with spray.
Engine runsgood at no-load but
"bogs" when load is added.
Enginewill not start;or starts and
runsrough.
1.
Low pressure spray tip installed.
2.
Water inlet is blocked.
3.
Inadequate water supply.
4.
inlet hose is kinked or leaking.
5.
Clogged inlet hose strainer.
6.
Water supply is over IO0°F.
7.
High pressure hose is blocked or
leaks.
8.
Gun leaks.
9.
Spray tip is obstructed.
10. Pump is faulty.
High pressure spray tip installed.
Engine speed is too slow.
1.
Dirty air cleaner.
2.
Out of fuel.
3.
Stale fuel.
4.
Spark plug wire not connected to
spark plug.
5.
Bad spark plug.
6.
Water in fuel.
7.
Excessively rich fuel mixture.
1.
Replacewith high pressure spray tip.
2.
Clearinlet.
3.
Provide adequatewater flow.
4.
Straighten inlet hose, patch leak.
5.
Checkand clean inlet hose strainer.
6.
Provide cooler water supply.
7.
Clearblocks in high pressure hose or
replace hose.
8.
Replace gun.
9.
Cleanspray tip.
10. Contact Sears service facility
Replacewith low pressure spray tip.
Move throttle control to FAST position. If
engine still "bogs down", contact Sears
service facility.
1.
Cleanor replace air cleaner.
2.
Fill fuel tank.
3.
Drain fuel tank; fill with fresh fuel.
4.
Connectwire to spark plug.
5.
Replace sparkplug.
6.
Drain fuel tank; fill with fresh fuel.
7.
Contact Sears service facility.
Engineshuts down during
Out of fuel.
Fill fuel tank.
operation.
Engine lacks power.
Dirty air filter.
Replace air filter.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido