Enable/disable time and date
Select "General" and press
press
. Select "Show Time and Date". Press
disable time and date.
Set time/date format
Select "General" and press
Press
. Select "Time" or "Date" and press
desired time/date format using
Service and maintenance
Troubleshooting
If an error occurs, the
needed.
SIM card error
If "SIM card error" is shown in the display, open the battery lid,
remove the battery and exchange the SIM card. Insert the battery
and close the battery lid.
Out of range
If "Out of range" is shown in the display, return to a location
within range.
Replace the battery
Open the battery lid, exchange the battery and put the
transceiver in a charger.
Note: For ATEX/IECEx transceivers, see ATEX/IECEx safety
instructions.
Restore the clip release function
The clip has a special release function to prevent it from breaking
when strained. When the clip is released and becomes slack, just
snap it back with a hard press.
Accessories
The following accessories are available:
• Leather case
• Swivel type clip
• Name label kit
• Single Charger
• Charging Rack
10
. Select "Time and Date" and
. Select "Time and Date" and
icon is shown in the display. Service is
!
to enable/
. Select the
and press
.