Artrom DM-10R Manual De Instrucciones página 25

Operation
Removing the collected water
There are two ways to remove collected water:
1.Use the bucket
When the bucket is full, remover the bucket and empty it.
NOTE: A little water will drop down to the chassis after
the bucket is removed. This is a normal phenomenon.
Please the user handle it himself.
2.Continuous draining
Water can be automatically emptied into a floor drain
by attaching the unit with a water hose (Id=Φ13.5mm,
optional).
NOTE:
-Make sure the connection is tight and there is no leak.
-Lead the water hose to the floor drain or a suitable
drainage facility, the drainage facility and the water
hose should be lower than the drain outlet of the unit.
-Be sure to run the water hose sloping downward to let
the water flow out smoothly.
-When the continuous drain feature is not being used,
remove the drain hose from the outlet.
NOTE:
water outlet
All the illustrations in the manual are for explanation
purpose only. Your machine may be slightly different.
The actual shape shall prevail. The design and
specifications are subject to change without prior
notice for product improvement. Consult with the
sales agency or manufacturer for details. Any updates
to the manual will be uploaded to the service website,
please check for the latest version.
24
Remove the
cover
Water hose