Technical Data; Machine Data; Noise And Vibration Declaration Statement; Additional Vibration Information - Atlas Copco TEX 140P Manual Del Usuario

Safety and operating instructions

Technical data

Machine data

Shank
dimension
Type
TEX 140P H22 x 82,5 US
H25 x 108 US
TEX 140PS H22 x 82.5
H25 x 108
H25 x 108 US
TEX 150PE H22 x 82.5
H25 x 108
H25 x 108 US
TEX 180PS H25 x 108
H28 x 160/152
H 25 x 108 US
TEX 190PE H25 x 108
H28 x 160/152
H 25 x 108 US
TEX 220PS H25 x 108
H28 x 160/152
H32 x 160/152
TEX 230PE H25 x 108
H28 x 160/152
H32 x 160/152
TEX 270PS H28 x 160/152
H32 x 160/152
TEX 280PE H28 x 160/152
H32 x 160/152

Noise and vibration declaration statement

Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table "Noise and vibration
data" for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.

Additional vibration information

This information is provided to assist in making rough estimates of the vibration value in the workplace.
20
Weight
mm kg
13,9
13,9
15.5
15.5
15.5
19
19
19
19
19.5
19.5
22.5
23
23
22
23.5
23.5
25.5
27
27
28
28
31.5
31.5
© 2015 Atlas Copco Construction Tools AB | No. 9800 0683 82h | 2015-08-21
TEX 140P, 140PS, 150PE, 180PS, 190PE, 220PS,
Length Impact freq.
mm Hz
590 25,5
590 25,5
590 25.5
590 25.5
590 25.5
590 25.5
590 25.5
590 25.5
595 25
645 25
645 25
595 25
645 25
645 25
625 22
670 22
670 22
625 22
670 22
670 22
690 20.5
690 20.5
690 20.5
690 20.5
230PE, 270PS, 280PE
Air
Consumption
l/s
25
25
25
25
25
25
25
25
26
26
26
26
26
26
30
30
30
30
30
30
32
32
32
32
Original instructions