Technical Data; Machine Data; Noise And Vibration Declaration Statement - Atlas Copco TEX 20PS Instrucciones De Seguridad Y De Funcionamiento

TEX 20PS, 21PE, 32P/PS, 33PE, 39P/PS, 40PE, P60/S,
P90/S

Technical data

Machine data

Shank
dimension
Type
TEX 20PS H 25 x 108
TEX 20PS-1 R 25 x 75 sq
TEX 21PE H 25 x 108
TEX 21PE-1 R 25 x 75 sq
TEX 32P H 28 x 160/152
H 32 x 160/152
TEX 32PS H 28 x 160/152
H 32 x 160/152
TEX 33PE H 28 x 160/152
H 32 x 160/152
TEX 39P H 28 x 160/152
H 32 x 160/152
TEX 39PS H 28 x 160/152
H 32 x 160/152
TEX 40PE H 28 x 160/152
H 32 x 160/152
TEX P60 H 28 x 160/152
H 32 x 160/152
TEX P60 S H 28 x 160/152
H 32 x 160/152
TEX P90 H 28 x 160/152
H 32 x 160/152
TEX P90 S H 28 x 160/152
H 32 x 160/152

Noise and vibration declaration statement

Guaranteed sound power level Lw according to ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to ISO 11203.
Vibration value A and uncertainty B determined according to ISO 20643. See table "Noise and vibration data"
for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and values
measured in individual work places may be higher. The actual exposure values and risk of harm experienced
by an individual user are unique and depend upon the way the user works, in what material the machine is
used, as well as upon the exposure time and the physical condition of the user, and the condition of the machine.
We, Atlas Copco Construction Tools AB, cannot be held liable for the consequences of using the declared
values, instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to managing
hand-arm vibration can be found at http://www.humanvibration.com/EU/VIBGUIDE.htm
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
© 2010 Atlas Copco Construction Tools AB | No. 9800 0650 90a | 2010-01-01
Original instructions
Weight
mm kg
20.0
20.0
21.0
21.0
32.0
32.0
34.0
34.0
37.0
37.0
37.0
37.0
39.0
39.0
42.0
42.0
31.0
31.0
33.0
33.0
41.0
41.0
43.0
43.0
Safety and operating instructions
Length Impact freq.
mm Hz
635 20.0
600 20.0
650 20.0
615 20.0
745 20.0
745 20.0
745 20.0
745 20.0
745 20.0
745 20.0
750 18.5
750 18.5
750 18.5
750 18.5
750 18.5
750 18.5
690 25.0
690 25.0
690 25.0
690 25.0
710 21.0
710 21.0
710 21.0
710 21.0
Air
Consumption
l/s
23
23
23
23
34
34
34
34
34
34
40
40
40
40
40
40
36
36
36
36
40
40
40
40
21